Emtek Hammered Lever with Hammered Rosette

$111.30

Add to Cart:

Please Choose:
Finish

Function

Handing

Backset

THIS ITEM WILL SHIP IN 7 TO 10 DAYS

Arts & Crafts Solid Brass Levers from Emtek

Fits door thickness 1 3/8" to 1 3/4" and Backset 2 3/8" or 2 3/4"
Includes Latch & Strike Plate

Backset:

Backset: In the U.S. there are two common backsets for residential locks, 2-3/8" and 2-3/4". The backset is the distance from the edge of the door to the center of the 2-1/8" bore hole.

Bore a 2-1/8" hole through the door. The center of this hole should be located 2-3/8" or 2-3/4" back from the edge of the door (this is the backset dimension).

Functions:

Passage knobs or levers are for doors that do not need locked, such as a closet or doors between rooms and family rooms or living rooms.
Privacy knobs or levers are used on doors where locks are needed, such as on bathrooms, or bedrooms on interior doors.
Dummy sets are for doors where no latches are needed. These knobs or levers do not turn. They can be split up for bi-fold door set, since no hardware is needed on back of the bi-folds. Dummy knobs and levers can also be used on double french door units, where ballcatches are used to hold doors in place. Dummy Pairs do not require a standard hole to be drilled, since most are attached from each side of the door

Handing: