Emtek #8 Style Brass Deadbolt

Starting at: $46.00

Add to Cart:

Please Choose:
Finish
Backset
Cylinder Option
Key Option
Enter 5-Digit Custom Key Code
Deadbolt Strikeplate
This selection is only for if you are additionally getting one of the Heavy Duty Strikeplates.
Deadbolt Strikeplate Finish

THIS ITEM WILL SHIP IN 3 TO 5 DAYS

Standard Brass Deadbolts, from Emtek, featuring:

Standard Schlage "C" Keyway,
Solid Brass Cylinder, Collar, Housing, and Rosette
Hardened Steel Bolt
Standard Door Prep and Installation

NOTE: Low Profile style has a projection that is about half as much as a typical deadbolt.

Includes:

Extension Collar for Thin Doors shipped with every Rope and Low Profile style deadbolt.
Heavy Gague Steel Understrike
Brass Trim Strike shipped with every Deadbolt

Backset:

Backset: In the U.S. there are two common backsets for residential locks, 2-3/8" and 2-3/4". The backset is the distance from the edge of the door to the center of the 2-1/8" bore hole.

Bore a 2-1/8" hole through the door. The center of this hole should be located 2-3/8" or 2-3/4" back from the edge of the door (this is the backset dimension).

Cylinder Option:

Single Cylinder- The deadbolt is keyed on one side, requiring a key to lock or unlock from exterior and usually a thumbturn or pushbutton to unlock from interior. Single Cylinder is used in most residential locations.
Double Cylinder- The deadbolt is keyed on both sides, requiring a key to lock or unlock from either side. In some locations Double Cylinder locks will not pass code.

Keying Options:

All Keyed Alike- All deadbolts with be keyed with the same key code. One key will open all deadbolts.
All Keyed Differently- Each deadbolt will be keyed with a different code. Each deadbolt will have it's own separate key.
Custom Keying- Provide your own 5 digit key code, to match existing locks.

Model: RBRSDB-DEC
Manufactured by: Emtek

Product 5/9